Ade biako a ɛtaa haw bere a wɔrepaw nneɛma a wɔde besisi dan atifi nekɔla a ɛreyera.
Wɔ mmeae pii no, ɔdan atifi nya owia hann a ano yɛ den, osu kɛse tɔ, ɔhyew, ne efĩ afe mũ no nyinaa. Mpɛn pii no, nneɛma a wɔde si ɔdan atifi a wɔde di dwuma wɔ amanne kwan so no yera, ɛpopae, anaasɛ kɔla sesa wɔ mfe kakraa bi mu.
Enti ɔkwan bɛn so na wobɛyɛresin a wɔde ayɛ ɔdan atifi nnuatumi kura wɔn kɔla a ɛhyerɛn na ɛkɔ so daa no mu mamfeɛ 10–30?
Mmuae no danneɛma a ɛkɔ anim, mfiridwuma a wɔde yɛ nneɛma a ɛwɔ soro, ne nneɛma a wɔyɛ no pɛpɛɛpɛ.
1. ASA Surface Layer: Ade titiriw a ɛma kɔla no gyina pintinn
High-quality resin ɔdan atifi tiles de anASA (Acrylonitrile Styrene Acrylate) a ɛwɔ soro no, a wɔayɛ no titiriw sɛnea ɛbɛyɛ a ɛbɛma abɔnten so wim tebea atumi agyina ano.
ASA de ma:
UV a ɛko tia a ɛkyɛn so
Adwuma a emu yɛ den a ɛko tia-onyin
Kɔla a ɛkorɔn a ɛyɛ den wɔ owia a wɔde di dwuma bere tenten-bere ase
Nea ɛnte sɛ nneɛma a wɔayɛ ho adwini no, ASA kɔla yɛa wɔde afrafra asɛm no ankasa mu, a wɔmfa nhyɛ so sɛ ade a wɔde kata so. Eyi mma ɛnyɛ nea ɛho ntew, mpaapae, na ɛnsɛe.
2. Co-Extrusion Technology Hwɛ Hu sɛ Kɔla a Ɛtra Hɔ Daa
Wɔde nnɛyi resin dan atifi nnua na ɛyɛmulti-layer co-extrusion mfiridwuma.
Nhyehyɛe a wɔtaa yɛ no bi ne:
Top ASA wim tebea-a ɛko tia layer– bɔ kɔla ne ɔfasu ho ban
Mfinimfini ahoɔden layer– ma nsunsuansoɔ ne adesoa a ɛko tia
Ase hɔ mmoa layer– hwɛ hu sɛ nhyehyɛe no gyina pintinn
Esiane sɛ kɔla a ɛwɔ so no bom daa bere a wɔreyɛ no nti, bere kɔ so no, ɛnsɛe anaasɛ ɛnhohoro.
3. UV a Ɛko Tia Ahoɔden Siw Owia Sɛe
Ultraviolet mframa ne ade titiriw a ɛma ɔdan atifi yɛ mmerɛw.
Wɔde resin ɔdan atifi nnua na ɛyɛ:
Nneɛma a ɛma UV gyina hɔ pintinn
Nneɛma a wɔde ka ho a ɛko tia-oxidation
Wim tebea-a ɛko tia polymers
Saa nneɛma yi ma molecule ahorow no sɛe brɛoo, na ɛma ɔdan no atifi kɔ so kura ne mfitiase kɔla no mu mpo wɔhigh-UV mmeae te sɛ mmeae a osu tɔ na owia bɔ kɛse, sare so, ne mpoano.
4. Non-Porous Surface Ko tia Nkekae ne Kɔla a Ɛsakra
Resin dan atifi nnua wɔ aɔfasu a ɛyɛ torotoro, a ɛnyɛ-porous, a ɛkyerɛ sɛ wɔntwe wɔn ho:
Nsuo
Mfuturo
Efiyɛ
Nnuru a aka
Osu nsu fi awosu mu hohoro efĩ a ɛwɔ soro no, na esiw nkekae ne kɔla a ɛnsakra pɛpɛɛpɛ ano. Eyi ma ɔdan no atifi hwɛbea tew na ɛyɛ pɛ mfe pii a wonsiesie no pii.
5. Acid Osu ne Nneɛma a Atwa Yɛn Ho Ahyia a Ɛyɛ Den a Wɔko tia
Wɔ mmeae a wɔyɛ mfiridwuma ne nkurow akɛse mu no, osu a acid tɔ ne mframa a wɔsɛe no taa ma ɔdan atifi nyin ntɛmntɛm.
Resin ɔdan atifi nnua yɛ nea nnuru ntumi nkɔ mu na ɛko tia:
Acid osu a ɛtɔ
Alkali a wɔde hyɛ mu
Nkyene a wɔde petepete so (mpoano mmeae) .
Mfiridwuma mu wusiw
Saa nneɛma a atwa yɛn ho ahyia a ɛko tia yi di dwuma titiriw wɔ kɔla a ɛkɔ so daa-bere tenten a wɔkora so no mu.
6. Strict quality Control ne Kɔla Sɔhwɛ
Wɔn a wɔyɛ nneɛma a wotumi de ho to so sɔ resin ɔdan atifi nnua hwɛ denam:
UV onyin ho sɔhwɛ ahorow a wɔyɛ no ntɛmntɛm
Abɔnten so a wɔde wɔn ho hyɛ mu ho mfonini ahorow
Ɔhyew a ɛkorɔn-ɔhyew a ɛko tia sɔhwɛ
Kɔla ahorow a ɛgyina pintinn nhwehwɛmu
Saa sɔhwɛ ahorow yi hwɛ hu sɛ tiles no kɔ so yɛ sɛnea ɛte wɔ wɔn som nkwa nna a wɔayɛ no nyinaa mu.
7. DabiRepaint a wɔsan yɛƐhia
Nea ɛnte sɛ dade a wɔde yɛ ɔdan atifi no, resin a wɔde yɛ ɔdan atifienhia sɛ wɔsan yɛ ho adwinisɛnea ɛbɛyɛ a wobɛkɔ so akura ne honam ani hwɛbea mu.
Eyi gye:
Ɛka a wɔbɔ wɔ nsiesie ho
Brɛ
Bere a wɔde yɛ adwuma
Ɔdan atifi no da so ara yɛ nea ɛyɛ fɛ wɔ ne nkwa nna nyinaa mu.
Enti, ɔkwan bɛn so na resin ɔdan atifi nnua kɔ so kura ne kɔla mu mfe pii?
✔ ASA wim tebea-a ɛko tia soro layer
✔ Co-extrusion adwumayɛ mfiridwuma
✔ UV a emu yɛ den ne nnuru a ɛko tia
✔ Non-porous, ne ho{1}}hotew soro
✔ Adwumayɛfo a wɔhwɛ nneɛma so yiye
Sɛ wɔka bom a, saa nneɛma yi hwɛ hu sɛ resin ɔdan atifi nnua makɔla a ɛtra hɔ kyɛ, nea ɛtra hɔ kyɛ, ne afɛfɛde bo.
Wɔ adan a wɔtra mu, mfiridwuma, ne kuayɛ mu no, resin ɔdan atifi nnua yɛ ade a nyansa wom ma adetɔfo a wɔpɛ sɛ wonya ɔdan atifi a ɛte saahwɛ foforo mfe pii a wonsiesie no bere nyinaa.